CBE1-5K CBE1-10K
型 号 额 定 量 程 固有频率
(Hz) 额定位移量
(参考值) 重量 (约kg)
CBE1-5K 49.03 N {5 kgf} 250 0.19 0.73
CBE1-10K 98.07 N {10 kgf} 384 0.21
CBE1-20K 196.1 N {20 kgf} 420 0.21 0.76
CBE1-50K 490.3 N {50 kgf} 555 0.25
CBE1-100K 980.7 N {100 kgf} 1 250 0.23
CBE1-200K 1.961 kN {200 kgf} 1 428 0.32
额定量程 49.03 N {5 kgf}～1.961 kN {200 kgf}
安全过载 150 %R.C.
极限过载 200 %R.C.
额定输出 2 mV/V±0.003 mV/V
非线性 0.05 %R.O.
滞后性 0.05 %R.O.
重复性 0.03 %R.O.
推荐激励电压 12 V 以下
最大激励电压 20 V
零点平衡 ±0.02 mV/V
输入电阻 350 Ω ～ 450 Ω
输出电阻 345 Ω ～ 355 Ω
绝缘电阻 2 000 MΩ 以上(DC50 V)（电桥～主体之间）
补偿温度范围 －10 ℃～60 ℃
安全温度范围 －20 ℃～80 ℃
温度变化对零点的影响 0.03 %R.O./10 ℃
温度变化对输出的影响 0.03 %LOAD/10 ℃
电缆 φ6.3、带4芯屏蔽线5 m直接连接、带前端Y型压接端子
防护等级 IP67
弹性体的材质 不锈钢
重量 CBE1-5K～10K：约0.73kg；CBE1-20K～200K：约0.76kg
寿命 额定量程时1 000 000次
CBE1-5K CBE1-10K
AST4300阻燃式压力变送器
The AST4300 is a Class I Division 2 non-incendive pressure transmitter for use in hazardous areas. In addition to its rugged construction and industry-leading price-to-performance ratio, the AST4300 pressure transmitter is the solution for pressure measurement for a variety of applications.
AST can package the AST4300 pressure transmitter for indoor or outdoor use. It utilizes AST"s proprietaryKrystal Bond? Technology, a one-piece stainless steel sensing element that offers excellent long-term stability and repeatable results. This MEMS technology completely isolates the media to all 316L stainless steel or all Inconel718, depending on the application. A variety of process connection threads are available including 1/4" NPT and 1/2" NPT. Output signals are available for long transmissions (4-20mA) or low power (voltage) applications.
Design Benefits
- Krystal Bond? Technology
- Class I Division 2 Non-Incendive Groups A, B, C, D
- ATEX / IECEx: Ex nA IIC T4 Gc (Ta = -40°C to 85°C) for conduit electrical connections
- ANSI/ISA 12.27.01 Single Seal
- CE EN61326
- American Bureau of Shipping (ABS) Type Approval
- High Strength Stainless Steel Construction with all 316L or Nickel Alloy
- No Oil-filled Cavities, Welds or O-rings
- From Vacuum to 20,000 PSI
- Unparalleled Price and Performance
- Compatible with Various Liquids and Gases
- EMI/RFI Protection
Applications / Industries Process Control
- Gas Compression & Storage
- Off-Shore Platform ESD Compressor Systems
- Natural Gas Engine Pressure
- Oilfield SCADA Pressure Equipment
- Test Equipment
- Oxygen Pressure Measurement (316L)
- Hydrogen Fuel (316L)
- Refrigeration Pressure
- Water Management
AST43LP低压阻燃式压力传感器
The AST43LP is a low pressure Class I Division 2 stainless steel pressure transmitter / pressure transducer for use in hazardous areas. In addition to its rugged construction and the best price-to-performance ratio in the industry, the AST43LP is the solution for low pressure measurement for a variety of applications. The AST43LP is also now available withCSA Single Seal Approval.
Design Benefits
- Class I Division 2 Non-Incendive Groups A, B, C, D
- ATEX / IECEx: Ex nA IIC T4 Gc (Ta = -40°C to 85°C) for conduit electrical connections
- ANSI 12.27.01 Single Seal
- ABS (American Bureau of Shipping) Approved
- High Strength Stainless Steel Construction with all 316L
- Wide Operating Temperature
- From 0-1 to 0-15 PSI
- Low Static and Thermal Errors
- Unparalleled Price and Performance
- Compatible with Various Liquids and Gases
- EMI/RFI Protection
- Bi-directional ranges available
Applications / Industries Industrial OEM Equipment
- Oil & Gas Equipment
- Pressure Instrumentation
- Process Control
- Gas Compression & Storage
- Test Stands
- Vapor Recovery
CBE1-5K CBE1-10K