| Model | |
| Rating | Operating voltage
Current
Power
Min. operating start voltage | 1~60V
60A
300W
1.5V |
| CC Mod | Operating range | H range | 0~60A |
| L range | 0~60A |
| Setting accuracy | ±(0.3%±20mA) |
| Setting resolution | H range | 1mA |
| L range | 1mA |
| CR Mode | Operating range | H range | 0.05Ω~4KΩ |
| L range | 0.05Ω~4KΩ |
| Setting accuracy | H range | 1mΩ |
| L range | 1mΩ |
| Setting accuracy | ±(0.5% +20mΩ) |
| CV Mode | Operating range | 0~60V |
| Setting accuracy | ±(0.5% +10mV) |
| Setting resolution | 1 mV |
| CP Mode | Operating range | 0~300W |
| Setting accuracy | ±(0.2% +10mW) |
| Setting resolution | 1 mW |
Dynamic
Operation
CC Mode
only | T high, T low | 20μS~9999sec |
| Slew rate | H range | 1mA~2.5A/μS |
| L range | 1mA~2.5A/μS |
| Accuracy | ±5% |
| Voltage | Accuracy | | ±(0.1% +10mV) |
| Read- back | Resolution | H range | 0.01V |
| | | L range | 0.001V |
Current
Read- back | Accuracy | ±(0.3% +20mA) |
| Resolution | H range | 0.01A |
| L range | 0.001A |
Current
Monitor | Full scale output voltage | 10V/60A |
| Accuracy | ±(2% +100mV) |
Short
Test | Function | Built-in with short current indicate |
| Short Current Indicate | 60A |
| Accuracy | ±(2% +100mA) |
| Memory：40 Set test parameter store, recall function |
| Power consumption：100W max. |
| Power requirement：115VAC(105~125V) or 230VAC (210~250V) 50/60Hz |
| Operating temp：0℃~40℃ |
| Mechanical size： 110(W) ×440(D) ×177(H)mm |
Option：﹡ GPIB Function: SH1, AH1, T8, L4, RL2 ﹡Switching power supply Test fixture
Special order for large capacity load is possible |